Material: AISI 304 grade (18 / 8 Cr-Ni) stainless steel

Material Width:

Worktop                                               1.50 mm

Bottom Shelf                                        1,00 mm

Intermediate Shelf                                 1,00 mm

Drawer                                                 1,00 mm

Lateral Panels                                      1,00 mm

Material Surface Finishing: PVC film coated, 4N surface finish

Dimensions: Describes lenght x depth x height

Dimensions may vary due to changes on net measurement of the site.

Welding and Visibles Parts: Generally welding shall be made of Argon-Arc system, but via Cr-Ni electrodes where necessary. Table tops and visible parts welding shall be mopped and satina finished. Other parts shall be left to its Natural(China Granite) sight and dim.

Top and Shelves: The sides of the tables adjacent to walls shall be 60 mm, open sides shall be 40 mm and double bent. Top shall be supported by U profiles. Silicone shall be used between profiles and top in order to provide sound isolation. Shelves shall be 40 mm high and shall be double bended.

Sliding or Hinged Doors: Sliding doors shall be hung from the upper side along plastic coated Cr-Ni profiles. Hinged doors shall have U type hinges. Doors shall be double sided.

Drawer: Units drawer shall be made of stainless steel, interior depth of drawer shall be dependable to number of drawers. Drawer may be at right, middle or left sides of the unit, depending on the project requirements.